Electronics & Technology

5G use areas

5G+ information, 5G+ converged media, 5G+ industrial Internet, 5G+ car networking, 5G+ smart logistics, 5G+ smart port, 5G+ smart mining, 5G+ smart power, 5G+ smart oil and gas, 5G+ smart agriculture, 5G+ smart water conservancy, 5G+ smart education, 5G+ smart Medical care, 5G+ cultural tourism, 5G+ smart city.

1. Industrial field

The 5G crane, by implanting 5G industrial modules, leverages 5 G's ultra-low latency and the super uplink upload rate of up to 200Mbps, allowing operators to control the crane accurately in the steelmaking zone in real-time without leaving home. Scrap steel unloading across overhead cranes, tank transportation and loading, and other operations have increased production efficiency by 16% and reduced staff turnover by 15%. The application of 5G in industry is primarily reflected in three aspects: smart manufacturing, remote control, and innovative industrial parks. Taking intelligent manufacturing as an example, it is based on end-to-end data flow, real-time communication, and information exchange between massive sensors and artificial intelligence platforms, which impose strict requirements on communication networks, and 5G networks can be highly modular and flexible in production. The system provides diversified and high-quality communication guarantees.

Create an unmanned crane by installing a 3D scanner, a rangefinder, and a high-definition camera integrated with a 5G module on the crane, and use the 5G network to transmit the data to the MEC edge server in real-time for 3D modeling and calculate the action instruction set to be issued The implementation of the crane has realized the unmanned automatic loading and transportation of the crane, which has brought a 33% increase in production efficiency.

The robotic arm and control system start the automatic operation of the robotic arm through a 5G remote one-button operation, replacing workers to add slag on-site beside high-temperature molten steel, reducing the risk of operating in high-risk environments and significantly improving the quality of steel production.

In addition, in response to the stringent safety requirements of high temperatures in the steel plant, the three parties built a high-definition video surveillance system supported by 5G ultra-large bandwidth, and multiple parallel video streams enabled managers to monitor the plant in real-time.

At the port terminal, the height of the tires used to transport containers exceeds 10 meters. Industrial wifi technology was unstable in the past, and workers were required to sit in a high-control room to operate the crane. The port logistics park has achieved 5G network coverage. After installing the four-way 5G network camera on the tire crane, staff can monitor and control it indoors, improving work efficiency and making the working environment more user-friendly.

2. Medical Industries

Remote diagnosis, remote control, and a hospital-intelligent disinfection machine. With the popularization of 5G technology and its extensive integration with cloud computing, big data, and artificial intelligence, it will surely play a crucial role in promoting the medical industry's digital transformation and innovation. Applying 5G in the medical field will also have substantial practical significance. For example, doctors' remote treatment (surgery, etc.) will require a very high network capacity, and 5G can fully meet such requirements, so remote diagnosis and treatment will become familiar methods. The application of 5G in medical treatment primarily focuses on three aspects: remote diagnosis, remote surgery, and emergency rescue. Traditional remote consultations usually use a wired connection for video communication, which incurs high construction and maintenance costs and offers poor mobility. The high-speed capabilities of 5G networks can support 4K/8K remote high-definition consultations and the high-speed transmission and sharing of medical image data. At the same time, experts can provide consultations anytime and anywhere, improve the accuracy of diagnosis and guidance, and promote the development of high-quality medical resources. Sink. Regarding remote consultation, 5G can also find a place in the medical industry. 5G high-speed network channels can support higher-definition real-time video communication, with excellent prospects in remote consultation, remote imaging diagnosis, and other medical services.

3. Education Field

Using the 5G network and holographic live-broadcast technology, the two campuses have the same class, creating the school's 5GMR innovative teaching application and breaking down educational imbalances through 5G distance education, VR teaching, and other models. Applying 5G to education will also be a clear development trend. 5G can allow artificial intelligence products to gradually land in the field of education, thereby solving the problem of uneven distribution of educational resources and enabling students to receive higher-quality educational resources. The application of 5G in education is primarily reflected in innovative teaching and intelligent campus environments. Taking brilliant teaching as an example, the "5G + holographic interactive classroom" technology will profoundly change the teaching form and, at the same time, help to break the time and geographical constraints, provide students with an interactive and immersive three-dimensional learning environment, promote education balance, and truly implement the Ministry of Education. The teaching requirements of the whole time domain, airspace, and audience are advocated.

4. Cultural tourism field

5G Smart Museum" allows audiences to enjoy higher-speed network services and high-definition video content, and instantly obtain information such as cultural relics, knowledge links, and service facilities. At the same time, through 5GAR/VR and other "black technologies," they can immerse themselves in the Experience of ancient civilizations. Essence. 5G Smart Museum APP. The APP has changed the traditional cultural dissemination of texts and pictures. Through video, voice explanation, 3D images of cultural relics, AR, and 5G technology, it presents rich multimedia cultural relics to the audience. Applying 5G in tourism mainly involves bright scenic spots and intelligent hotels. Taking smart hotels as an example, users can directly use their mobile phones to access the 5G network, experience the high speed of 5G download and upload, and experience the information query, destination guidance, robot delivery, and other services provided by 5G intelligent robots, thereby improving the Efficiency of hotel services.

5. The financial sector

The application of 5G in finance is mainly reflected in smart outlets and virtual banks. Taking virtual banks as an example, through target and environment identification, ultra-high-definition and XR playback, high-speed and accurate information collection and services, users can be identified remotely, and XR-based transaction services are provided, thereby improving the Efficiency of bank operations.

6. Life area

5G smart trash can

Hexagon nuts

AS 1112.1-2000 ISO metric hexagon nuts, style 1- product grades A and B
AS/NZS 2451-1998 Hexagon head nuts(BSW)
AS/NZS 2465-1999 Hexagon nuts (UNC and UNF)
ASME/ANSI B 18.2.2-2010 Small pattern hex machine screw nuts ASME/ANSI B 18.2.4.2M-2010 Metric hex nuts, style2
 BS 1768-1963 Unified hexagon thick ordinary nuts
BS 1981-1991 Hexagon nuts, size#0 to #12
BS 325-1947 Black hexagon nuts
BS 3692-2001 Metric hexagon nuts
BS 4190-2001 Metric hexagon nuts
BS 450-1958 Machine screw nuts-precision type
BS 916-1953 Hexagon nuts-Black
DIN 2510-5-1971 Bolted connections with reduced shank hexagon nuts
DIN 34814-1999 Plastic hexagon nuts
DIN 555-1987 Hexagon nuts-product grade C, M5 to M 100x6
DIN 934-1987 Hexagon nuts with metric screw threads, product grades A and B
DIN 970-1982 Hexagon nuts-Style, metric coarse thread, product grades

5G has fully adapted to industrial scenarios from the four dimensions of critical technologies, ecosystems, industrial standards, and business models, bringing real business success. It is believed that with the highlighting of the benchmarking effect and the continuous improvement of these four dimensions, thousands of industries will accelerate their embrace of 5G from 0 to 1, from quantitative change to qualitative change, accelerate the release of the great value of "5G changing society".

7. IoT & Transportation

In the 5G era, the Internet of Things will be fully developed, and it will serve as an essential foundation for big data and artificial intelligence. There are tremendous development opportunities. Autonomous driving will undergo rapid development in the 5G era. In some specific scenarios, autonomous driving will be the first to achieve landing applications, such as agriculture. The automatic driving of equipment in the agricultural field has vital practical significance.

On the one hand, the driving of agricultural machinery often has precise route planning; on the other hand, the driving intensity is relatively large. Autonomous driving will significantly reduce the workload for agricultural laborers. With the implementation of the 5G standard, there will be many application fields, including wearable devices, the industrial Internet of Things, and other areas. The application of 5G in transportation mainly includes the Internet of Vehicles, autonomous driving, intelligent buses, smart railways, smart Airports, smart ports, and smart logistics. Taking smart logistics as an example, an innovative logistics park built on 5G technology will comprehensively leverage automation, driverless technology, and real-time monitoring to achieve efficient matching of people, vehicles, and goods, convenient mobilization, and controllable management throughout the process.

8. Government and Utilities

The application of 5G in government affairs and public utilities primarily falls into five sub-scenarios: bright government affairs, smart security, smart city infrastructure, smart buildings, and intelligent environmental protection. As an example, smart security: using the high transmission rate of 5G, the problem of slow reflection in existing video surveillance can be effectively addressed. In addition, 5G's multi-connection feature can further expand the monitoring range.

9. Agriculture

The application of 5G in agriculture primarily focuses on four aspects: intelligent farms, intelligent forest farms, astute animal husbandry, and smart fish farms. For example, in unmanned farm mode, through the integrated information management system of the agricultural cloud platform, combined with advanced technologies such as 5G, image recognition, satellite remote sensing, and big data, various types of unmanned farm machinery and equipment can be operated autonomously. At present, agricultural big data is shifting from technological innovation to application innovation, and the characteristics of 5G—bandwidth, delay, connection scale, etc. —will also bring massive amounts of raw data and powerful capabilities for controlling mechanical equipment in agriculture, thereby promoting wisdom—the evolution of agriculture.

10. Sports and entertainment

The application of 5G in culture, sports, and entertainment is primarily reflected in four sub-application fields: video production and broadcasting, innovative culture and blogs, brilliant cinema, and cloud games. Taking innovative cinemas as an example, under the influence of 5G technology, the clarity, spectacle, and sense of interaction in movie appreciation will be enhanced, and movies will become more "good-looking" and "fun." With the advancement of 5G, the development direction of the cinema chain will also focus on experiential cinemas, such as VR-intelligent comprehensive experience halls, which offer a high degree of realism and immersion, or become a new ecology.

11. Electricity

The application of 5G in electricity is mainly reflected in four aspects: innovative new energy power generation, intelligent power transmission and transformation, innovative power distribution, and wise power consumption. Taking innovative power distribution as an example, 5G is widely used, covering the whole process from fault monitoring and positioning to precise load control. These applications have high latency requirements, and the number of connections to be managed is relatively large. The high speed and large number of connections of 5G can meet the needs of intelligent power distribution.

12. Cloud computing

Cloud computing should be the 5G application scenario with apparent momentum at present

13. Drone express

5G also has significant advantages in drone flight management applications. The coverage of 5G signals can effectively remove the distance limitation of drones and expand their operating radius under safety supervision. The application in the logistics industry can improve the Efficiency of industry application processing and analysis, and improve the customer service experience.

Electronic Technology and Self-Service

Juxin Fateners supports many customers who design and manufacture various products in the electronics and technology sector. Our long-standing history of working with large OEMs within the electronics and telecoms industry has enabled us to develop significant infrastructure to support them best. We routinely provide advice and services, and study Cost-down suggestions. We understand the requirements specific to the manufacturing environments in the electronics and telecoms industry. Over the last 23 years, we have perfected the processes necessary to deliver on time-critical requirements, achieve zero defects, and operate in clean environments. Precision mechanical solutions and design resources for today's electronics form factors. Design the next generation of electronic devices to make the world more connected. Electronics & Telecom Solutions: The electronics industry relies on many fasteners and assembly systems to ensure precision product manufacturing. Juxin Fastening's Global Electronics Group specializes in micro-mechanical fastening solutions, from miniature threaded fasteners, rivets, inserts, and standoffs to performance coatings and cosmetic finishes. We create the standards and innovations that enable cost-effective, enhanced product performance in consumer electronics devices, telecommunications, and networking equipment.

1. 5G use areas

The 5G era will affect the semiconductor, communications, artificial intelligence, and other industries, allowing the entire society to establish a brand-new system that can bring efficiency improvements to the whole economy and culture, and humans will be the ultimate beneficiaries of 5G. Telemedicine, autonomous driving, artificial intelligence, and other technologies can have huge market demand, improving the economy and Efficiency, but implementing these technologies requires a communication network with extensive coverage, high speed, and low latency. This technology is 5G. 5G commercialization and promotion are also facing significant challenges, such as the energy consumption of base stations. In the 5G era, it is a 5G mobile phone for humans, and it uses 5G networks to drive revolutionary changes across all aspects of industry and agriculture.

2. Telecoms

The arrival of the 5G era makes it possible to build a smart city that can perceive and obtain various information at any time through information collection and transmission equipment. The 5G mobile communication network transmits real-time information, and urban residents' electronic devices, vehicles, and government systems are collected and stored. Stored and other scattered information for data analysis, interconnection, multi-party sharing, and interaction, subverting the traditional city management model, improving the city's operation mode, and forming a more intelligent, comprehensive, interactive, high-speed, and integrated wisdom City.

We aim to work with designers, production, and purchasing staff to deliver the most cost-effective fastener solutions locally and globally. Juxin Fasteners specializes in fasteners and components for the telecoms industry, including bespoke parts. Within the electronics and technology sector, Juxin Fasteners supports many customers who design and manufacture multiple products, and purchasing staff to deliver the most cost-effective fastener solutions locally and globally.

Applications: Tower-mounted amplifiers, Interference filters, Active antennas, Same/multi-band combiners, Diplexers, TX/RX Filters, Power distribution units, Portable PIM (passive inter-modulation) test analyzers.Products: Tuning screws, commonly in silver-plated brass with assembled nuts, PCB inserts in tape and reel format for use in surface mount PCBA machines, Lid and connector screws, Specialized thread forming screws for aluminum (Hexiform) and magnesium bodies, Mounting Kits for Antenna, Dish and Mast mounting, HardwareHardwarestenings used in base station cabinets and construction, DIN, ANSI, and ISO standard fastenings

3. Information Technology

Fasteners and components for hard disk drives, laptops, desktops, servers, and networking. As the inventor of the most significant number of access hardware technologies designed specifically for enterprise computing, Juxin Fasteners takes pride in working with enterprise and telecom engineers to create innovative, customized solutions for faster, easier, and more ergonomic fastening and hardware. Electronics Engineering Standards Program Precision Mechanical Solutions： Design the next generation of electronic devices to connect the world more. The electronics industry relies on many fasteners and assembly systems to ensure precision product manufacturing. Juxin Fastening's Global Electronics Group specializes in micro-mechanical fastening solutions, from miniature threaded fasteners, rivets, inserts, and standoffs to performance coatings and cosmetic finishes. We create the standards and innovations that enable cost-effective, enhanced product performance in consumer electronics devices, telecommunications, and networking equipment.

Applications

As the inventor of the most significant access hardware technologies designed specifically for enterprise computing, Juxin fasteners takes pride in working with enterprise and telecom engineers to create innovative, customized solutions for faster, easier, and more ergonomic fastening and latching. Servers - rack, tower, blade, integrated systems

Computing - laptops, desktops, workstations

Personal devices - tablets, smartphones

Printing/scanning - laser, inkjet, plotters

Networking - routers, switches, wifi

Set-top box - cable/satellite: Enhance functionality while improving the end-customer experience with our fully scalable solutions that meet Open Compute Project (OCP) guidelines. As a member of the Open OCP community, Juxin Fasteners collaborates with enterprise computing OEMs worldwide to design efficient, flexible products for data centers. Secure components under shock and vibration and prevent the risk of falling or losing hardware. Hardware has an extensive range of fastening solutions for PC boards.

Products

Micro diameter screws used in cleanroom environments for hard disk & solid-state drives

Low-profile screws for desktops, notebooks, and tablets

More significant standard and non-standard fixings, such as plastic cable management parts, larger nut clips, and rack mounting

Fastenings for industrial server and storage assemblies

Accessories - mounting kits

4. Self-Service Retail Hardware, Enable Connectivity and Audit Trail

Enhance Equipment Reliability and create the Ultimate Customer Experience. Juxin Fasteners has long been established as an international provider of fasteners and hardware, serving this large and expanding marketplace. Secure convenient access at your command. Enable connectivity and equipment access tracking with intelligent electronic access solutions. Benefits include remote monitoring service personnel and an accessible audit trail. Whether board- or faceplate-mounted, or with low or high connector forces, our solutions can be adapted to meet your fastening and extraction needs. Choose from the most extensive portfolio of injecting/eject solutions to properly manage circuit packs, hard drives, and PC board assemblies. With the electronics sector evolving rapidly, Juxin Fasteners offers engineering expertise and deep industry knowledge. We help our customers overcome assembly issues with our comprehensive, application-based service. In addition, recognizing the trend toward smaller electronic products, Juxin Fasteners manufactures a range of sheet metal fasteners from M1.4 to ensure we assist our customers in producing smaller, lighter products.

Our products in this sector give our customers security and functional performance. We work with our customers to reduce in-place fastener costs, focusing on vendor base reduction, and to improve production efficiency by using thread-forming screws for metal and plastic. Engineered access solutions help self-service equipment manufacturers achieve high standards for equipment performance, usability, and security while enhancing aesthetic design. Put Juxin fasteners know self-service applications. Juxin Fasteners' proven solutions deliver enhanced durability to kiosks and minimize the need for replacements and servicing. Juxin Fasteners' components withstand harsh environmental elements. Juxin Fasteners' display positioning and hinge solutions enable unique industrial design options with enhanced ergonomics. Juxin Fasteners delivers smooth, secure positioning of monitors, screens, and access panels to improve the experience for end users and service personnel. Control, monitor, and track individuals, from building entry down to the equipment that physically stores sensitive data, with our complete range of mechanical and electromechanical access solutions designed to provide physical security at the rack level.

Keeping panels secure with visual indication: certain applications require a more advanced form of visible indication built into the locking and latching mechanism for enhanced security. These applications, such as high-end vending machines, lottery kiosks, and ATMs, typically require more frequent access for restocking and maintenance. Exceptional Security Durability and Performance, Applications, Financial services - ATM, card readers, cash counters, mobile technology - contactless sales, Retail - vending machines, self-service checkout, POS, Hospitality & travel - self-service check-in/out, Engineered access solutions help self-service equipment manufacturers achieve high standards of equipment performance, usability, and security while adding value to their aesthetic design, Put, Juxin fateners knows self-service applications. Locking mechanisms on these machines benefit from clear, easy-to-see visual indicators that let the end-user know whether the machine or enclosure has been accessed.

Products: Thread-forming screws for metal and plastic, Self-clinching nuts, standoffs, studs, Plastic cable management and circuit board hardware, Micro fasteners, Circlips, Test notes, cheques, cards, and envelopes, Cabinet locks, Hexagon head screws.Springs washers, flat washers. Magnets, Tapes, adhesives, Grommets and hole plugs, Earth clamp assembly kits, Decals and Labels, Gaskets, Lenticular animation badges, Rivets, blind rivets, and Cable markers.

Solutions for Rack-Mounted Servers, Switches, and Power Supplies. Leveraging our extensive industry experience, our design centers worldwide can work directly with your engineering team to adapt, modify, or fully customize solutions for your enterprise computing needs. Juxin offers the broadest range of rack-mounted equipment solutions, including captive hardware injectors, rack-attach mechanisms, and handles for chassis and modules. Applications： Motors, Motion controllers, Servo drives, Switchgear, Solar panels, PV panels, AC power blocks, Renewable energy.Products: Stainless steel fasteners, weld screws, Mounting kits, Anti-corrosion steel fasteners, high-strength fasteners, Stud bolts, Standard fasteners, DIN, ISO standard.

5. Data Center

Juxin Fasteners' intelligent rack-level access solutions significantly enhance the security of the world's growing data centers. Reduce downtime caused by human error and security breaches, and stay compliant with security standards: Lockout human error, lock in compliance. Positioned at the forefront of sheet metal fastening supply, Juxin fasteners is a trusted manufacturer of an extensive range of fasteners for pressing installation, including Floating Self-Locking Fasteners, Self-clinching nuts, Nuts for stainless steel SUS416 sheets, Broaching type standoffs &nuts, Concealed-Head studs &standoffs, Flush fasteners, Broaching type standoffs & nuts & studs, Panel fastener assemblies, Flush-mounted panel screws, Thru-Hole, threaded standoffs.

Studs&Cabinet Retrofit Kits

BS 2693-1-1956 Screwd Studs

DIN 2509- 1986 Double-end studs

DIN 6379-2003 Studs for use with T-nuts

DIN 797-1970 Special Foundation bolts

DIN 835-2010 Stude Threaded End≈2d

DIN938-1995 Studs with a length of engagement equal to about 1d DIN939-1995 Studs with a length of engagement similar to about 1.25d

DIN940-2010 Studs with a length of engagement equal to about 2.5d

DIN 34800-2005 steel hexalobular head bolts with small flange

DIN 34801-1999 steel hexalobular head bolts with large flange

DIN949-1-1995 Metric interference-fit thread studs

Learn More

Data Center Security Compliance, security solutions from the entry door to the rack

Secure Access Solutions for 5G Enclosures

Secure your racks with a variety of advanced security locking solutions.

Juxin Fasteners solutions help 5G network providers meet industry standards and UL Type ratings while adding value to their design, manufacturing, and product evaluation processes. Put, Juxin Fasteners knows telecom enclosure applications. Juxin Fasteners' data center solutions provide rack-level access control and monitoring, providing a comprehensive security system to control, monitor, and track individuals from building entry down to the equipment that physically stores sensitive data.

1. Modular Access Control Systems

Juxin fasteners' intelligent locks can incorporate any reader technology and be retrofitted into a cabinet, enabling physical access control down to the rack level. Options include a PIN pad, biometric or card reader, dual-factor authentication, and combinations of PIN pad and fingerprint.

2. Cabinet Retrofit Kits

Juxin fasteners ' OEM Cabinet Retrofit Kits allow existing mechanical cabinet locking systems to be easily upgraded to electronic locking solutions by providing hardware packages designed to fit standard cabinet manufacturers' panel preps. Electronic Access Solutions (EAS) improve equipment security and allow equipment connectivity to software systems and other machines. Juxin Fasteners offers a variety of intelligent electronic locks that enable connectivity and data capture and can grant access to equipment via electronic keys or a mobile app.

3. Fully Networked End-to-End Access Control

Juxin fasteners offer fully networked, IP-based access control systems designed to meet unique data center requirements. Designed to meet security and industry compliance requirements and provide an easy upgrade path from current solutions, we offer standalone, networked, wired, and wireless solutions, as well as OEM integration.

4. Seamless System I

Control data center security from the facility entrance to the rack level with Juxin fasteners' H3-EM Electronic Locking Swinghandle, featuring a modular reader, and our Security System Integration (SSI) Kit with a Wiegand interface. We can provide any level of integration between our solutions and your existing building access control system, allowing for one-screen monitoring of access.

5. 5G Small Cells5G &.Design for Equipment Longevity

Juxin fastener's broad product line of concealed and secure access solutions helps safeguard small cells from physical threats, delivering a better, more robust, and more reliable network. In high-use areas, the equipment lifecycle can be maximized with durable hardware to meet corrosion, ingress, and gasket-integrity standards. Juxin Fasteners' line of concealed latches removes equipment pry points, while multipoint latching solutions offer high latch strength and compression. We provide a range of durable materials for products designed to withstand varying temperatures and weather conditions.

6. Telecom Equipment

Juxin Fastener has developed a full range of products to comply with standards as a member devoted exclusively to accessing hardware and ejector solutions. From ejector handles, alignment/keying blocks, and captive retention screws, Juxin Fasteners has the solution for your telecom equipment application. Smart City equipment is becoming more valuable and is being installed closer to end users. Many machines store data and conceal next-generation technology, driving the need for maximum physical security. Juxin Fasteners offers a range of engineered mechanical and electromechanical locks and latches to meet additional security requirements.

7. Smart Poles & Industrial Lighting

Juxin Fastener's access hardware solutions help lighting manufacturers reduce installation time, simplify operations, and enhance security across various application environments. Smartphones, passenger jets, solar fields — no matter the application, we understand the unique requirements of the products our customers make.

8. Enclosures

Juxin Fastening has the solution for your enclosure application. Sheet Metal Fastenings: Juxin offers 'one-stop' solutions in manufacturing and supplying products widely used in various industry sectors. For over 23 years, Juxin Fastenings has been at the forefront of sheet metal fastener innovation, manufacture, and distribution. Offering a wide range of products for several applications and sectors, the company is confident it can provide solutions for a wide range of industry requirements. Please make sure parts are made to meet quality, volume, cost, and delivery needs. Whether you are looking to press, rivet, or weld during manufacturing or assembly processes, Juxin Fasteners' product portfolio offers a range of options.

9. Sheet Metal Products: fastening solutions for multiple industries.

Juxin Fastenings is an international specialist in designing, engineering, manufacturing, and distributing high-quality sheet metal fastening products. We supply components to over 1000 companies globally across various industries. Every industry has specific product and quality requirements, which we can meet through the extent of our portfolio and the scope of our quality certification.

We offer a full range of sheet metal fastening products, flexible manufacturing capabilities, and engineering expertise, including 24-hour online application advice. Juxin Fasteners' friendly and professional staff are on hand to assist our customers, providing before- and after-sales service. Juxin Fastenings is globally renowned for its high standards of products and services across the sheet metal industry.

Technical and Engineering Support

Our long-standing history of working with large OEMs within the electronics and telecoms industry has enabled us to develop significant infrastructure to support them best. We routinely provide advice and services such as. Our long-standing history of working with large OEMs within the electronics and telecoms industry has enabled us to develop significant infrastructure to support them best. We routinely provide advice and services, including standard and unique parts, new product introductions and approvals, standardization and rationalization projects, production line walks and "tear down" studies, and cost-down suggestions.

Supply Chain Solutions

We understand the requirements specific to the manufacturing environments in the electronics and telecoms industry. Over the last 20 years, we have perfected the processes necessary to deliver on time-critical requirements, achieve zero defects, and operate in clean environments.

Our brand, Juxin Fastening, is in the design, manufacture, and supply of innovative fasteners and installation systems. Juxin fasteners Enterprise specializes in micromechanical fastening solutions, from miniature threaded fasteners, inserts, and standoffs to performance coatings and cosmetic finishes. We create the standards and innovations that enable cost-effective, enhanced product performance in consumer electronics devices, telecommunications, and networking equipment. Juxin Fasteners is a diversified global provider of hand tools, power tools, related accessories, mechanical access, electronic security solutions, engineered fastening systems, infrastructure solutions, and more.

Electrification & Industrial Automation Fastening Solutions

Engineered High-Reliability Fasteners for Intelligent Industrial Systems

Electrification and industrial automation systems demand fastening solutions that go far beyond basic mechanical connections. In robotics, CNC machining centers, servo drive systems, renewable energy installations, and intelligent manufacturing equipment, fasteners directly influence structural stability, motion accuracy, electrical safety, and long-term durability.

At Juxin Fasteners, we provide engineered fastening systems designed to meet the performance, precision, and reliability requirements of modern industrial equipment manufacturers.

Vibration-Resistant and Anti-Loosening Fastening for Dynamic Systems

Industrial automation equipment operates under continuous dynamic loading conditions, including:

High-frequency vibration

Cyclic mechanical stress

Thermal expansion and contraction

Rapid acceleration and deceleration

Under these conditions, loss of preload is a primary cause of mechanical failure and accuracy deviation.

We provide advanced anti-loosening fastening solutions, including:

Locking round nuts

Wire thread inserts

High-strength structural bolts

Double-layer or wedge-lock washer systems

Self-locking thread designs

These systems maintain consistent clamping force, reduce maintenance frequency, and prevent critical equipment failure.

High-Strength Fasteners for Heavy-Duty Industrial Applications

For high-load environments such as wind turbines, automated production lines, and heavy robotics frames, fasteners must meet strict mechanical performance standards.

Our manufacturing capabilities include:

Property Class 8.8

Property Class 10.9

Property Class 12.9 high-strength alloy steel fasteners

These products provide:

High tensile strength

Superior shear resistance

Stable fatigue performance

Long-term load-bearing reliability

All materials are processed under controlled heat treatment to ensure consistent hardness and structural integrity.

Lightweight Fastening for Electrified and Robotic Systems

Weight optimization is critical in electrified systems and robotics to improve:

Energy efficiency

Motion control precision

Response speed

System integration flexibility

We support lightweight fastening applications using:

High-strength aluminum alloy fasteners

Corrosion-resistant stainless steel 304 / 316

Engineering plastic fasteners (nylon, PEEK, PPS, PTFE)

Engineering plastics are particularly suitable for:

Electrically insulated assemblies

Control cabinets

Battery energy storage systems

High-voltage environments

These materials provide both mechanical strength and reliable electrical insulation.

Corrosion Resistance for Harsh Industrial Environments

Industrial automation and electrification equipment often operate in:

Outdoor environments

Chemical processing facilities

Humid production plants

Marine or renewable energy installations

We provide corrosion-resistant fastening solutions with:

Stainless steel materials (304 / 316)

Zinc plating and environmental coatings

Zinc-nickel surface treatments

Neutral salt spray performance up to 720–1000 hours (zinc-nickel systems)

This ensures a longer service life and lower maintenance costs.

Precision Manufacturing for Automated Equipment

Precision motion systems such as:

Robot joints

Linear guide modules

Servo motor assemblies

Semiconductor equipment frames

require strict dimensional accuracy and surface quality control.

Our production process integrates:

CAD/CAM digital engineering

Automated forming and threading

Controlled tolerance machining

Consistent thread tolerance (6g standard)

We maintain strict quality inspection protocols to ensure repeatability and batch consistency for global OEM customers.

Intelligent Manufacturing and Digital Quality Control

As industrial equipment becomes smarter, fastening systems must support digital integration and traceability.

Our manufacturing system emphasizes:

Automated production lines

In-process quality monitoring

Mechanical performance testing

Lot traceability and documentation support

For high-end industrial programs, we support technical documentation and sample validation to assist engineering verification.

Customized Fastening System Solutions for OEM Manufacturers

Standard fasteners are no longer sufficient for complex automation systems.

We support customized solutions, including:

Application-specific material recommendations

Strength grade selection

Surface treatment optimization

Installation and preload guidance

Failure analysis and improvement suggestions

By working closely with design engineers and procurement teams, we help optimize fastening systems for structural stability, cost efficiency, and long-term performance.

Supporting the Future of Electrified and Intelligent Industry

In the electrification and industrial automation sectors, fasteners are strategic components influencing:

Equipment safety

Structural durability

Operational precision

Lifecycle cost control

With over 23 years of industry manufacturing experience, Juxin Fasteners delivers high-performance fastening solutions engineered for demanding industrial environments.