Blind Rivet Nuts Knowledge Base Setting Method

Setting Method：

Recommended Spin-Pull-Spin Installation Process

We recommend using the spin-pull-spin installation method for blind rivet nuts and studs. In this process, the rivet nut or stud is first threaded onto the mandrel by rotation, then inserted into the prepared hole. The tool subsequently applies a pulling force without rotation to deform and set the rivet nut body securely against the base material. After the proper setting is achieved, the mandrel is unscrewed and removed.

This installation method ensures consistent setting quality, reliable clamping force, and optimal performance in sheet-metal and thin-material applications.

Setting Tools and Installation Recommendations

Our complete range of blind rivet nut and stud setting tools is available in our catalog and on our website's Tools section. These tools are designed to accommodate varying material thicknesses, ensuring consistent and reliable setting results across different applications.

For simultaneous installation of multiple blind rivet nuts, press-based setting methods may be used. However, we strongly recommend consulting our technical team in advance to ensure proper tooling selection and process control.

Mechanical screwdrivers or spanners are not recommended for blind riveting, as they may damage the internal thread surface and negatively affect the strength and reliability of the final connection.

Before starting a series or mass production, we recommend performing a trial assembly to verify the settings and ensure optimal fastening performance.

Do you already have something specific in mind?

Need Help Finding the Right Solution?

Could you let our experts provide recommendations for your project or application?

Versatile Threaded Fastening for Thin-Walled Components

Blind rivet nuts and studs are among the most versatile fastening solutions for creating load-bearing internal or external threads in thin-walled workpieces. They can be installed in metal, plastic, and even ceramic components, making them suitable for a wide range of industrial applications.

Thanks to the blind (one-sided) installation method, Juxin blind rivet nuts and studs are often the only practical fastening solution for hollow sections, enclosures, housings, and applications with limited access on one side of the component.

No additional finishing operations are required after installation, even on coated or painted parts. This allows blind rivet nuts and studs to be installed at any stage of the production process, offering exceptional flexibility in manufacturing and assembly.

Unlike welded captive nuts, Juxin blind rivet nuts and studs do not expose components to high temperatures, eliminating heat-related distortion, surface damage, and metallurgical changes. The installation process is safe and clean, producing no fumes or gases and posing no fire risk.

With short installation times and low tooling costs, Juxin blind rivet nuts and studs provide clear economic advantages over alternative fastening methods. No heavy presses or complex tooling systems are required, reducing both setup time and production costs.

Juxin blind rivet nut and stud connections can be installed, removed, and reinstalled repeatedly without loss of performance. For manufacturers seeking to supply components with pre-installed threaded connections, Juxin blind rivet nuts and studs deliver reliable performance with minimal risk.