Call Us
+86 136 6007 9809
Call Us
+86 136 6007 9809
Name: Cable Tie Holder&Cable Tie Mount, Cable Tie Holder, Screw-In, PA66 UL94V2
Material: NYLON 66 (natural color), fire rating 94V-2.
Usage: Fix the holder with screws as shown in the right picture and then tie the cable with cable ties.
Mount to a surface and add a cable tie to secure a bundle.
Two-way mounts allow ties to be inserted from opposite sides.
Screw-in mounts require a fastener. Mounts that meet UL 94 V-2 stop burning within 30 seconds.
With our cable tie holder, you can fasten cables in such a way that they hold permanently, even in difficult application environments.
Cable tie holders, self-adhesive, pushed or screwed, are perfect for all applications that require reliable and permanent fastening solutions.
Product Specification
Mount to a surface and add a cable tie to secure a bundle.
Two-way mounts allow ties to be inserted from opposite sides. Four-way mounts allow ties to be inserted from any side. Any-way mounts allow ties to be inserted from opposite sides and have a head that spins to route the cable in any direction.
Screw-in mounts require a fastener. Adhesive-back mounts stick to any clean, smooth surface. Push-in mounts fit into a drilled hole. Adhesive-ready mounts require an adhesive to create a strong hold. Weld-on mounts are designed for use on machines or heavy equipment.
Mounts that meet UL 94 V-2 stop burning within 30 seconds.
Style P has a ridged shaft to mount in materials such as concrete, brick, and stone.
The disposable curing bracket has temporary adhesive strips to hold the mount in place while the adhesive cures.
Product Pictures
Contact Us
Tel.:
+86 020 8621 0320
+86 020 3121 6067
E-mail:
Technical Support:
Navigation
SEND INQUIREY
