Door Latches JX-DL-1/-4

Latches and Catches

Our latches and catches, including snap latches, panel catches, snap-in latches, and door latches, are quick and easy to install and use.

Door latches - Typically used with cabinet doors, they are a spring-loaded click lock. Constructed from Polyoxymethylene (POM) for the case, Nylon 66 for the catcher, Polycarbonate Glass-filled for the arm, and Grade 304 Stainless Steel for the spring.

Snap Latches - Consists of two parts, a female grommet and a male plunger. The grommet fits into a hole in the panel or application. The plunger then goes into the grommet. As it is pushed downwards, it causes the grommet to open, ensuring a tight fit. The plunger can be easily removed by pulling upward, which releases the grommet from the hole, allowing the snap latch to be removed and reused as needed.

Panel Catches - Consists of three parts, a striker, a base and a catch; the striker and the base fit together on one panel with the catch on a separate panel, the panels then fit together tightly an securely, the panels can be separated by pulling one panel from the other, which will release the striker from the catch. Can be easily reused as required and supplied as a set consisting of the three parts.

Snap-in Latches - These consist of two parts: a striker and a catch, supplied together as a set. The catch requires a hole diameter of 16.7 x 11.5 mm and a panel thickness of 1.7 mm; the striker requires a square hole measuring 7.0 x 7.0 mm and a panel thickness of 1.0 mm. The striker fits securely into the catch and can be easily removed and reused as required.

Packaging Standard

At Juxin Fasteners, we apply standardized export packaging to ensure product protection, traceability, and compliance with international logistics requirements.

1. Standard Export Packaging

Unless otherwise specified, all products will be packed according to our factory standard export packaging, which includes:

Moisture-resistant inner protection

Poly bag or small box packing as required

Reinforced export cartons

Clear labeling with part number, specification, batch number, and quantity

Palletizing for sea or air shipment when necessary

Our standard packaging is designed to ensure safe transportation, efficient warehousing, and long-distance international shipping.

2. Customized Packaging Options

We also provide customized packaging solutions according to customer requirements, including but not limited to:

Private labeling

Customized barcodes

Specific carton dimensions

Retail packaging

Special pallet configuration

Customer-specific marking and identification

So that you know, customized packaging may involve additional costs and extended lead time depending on the complexity of the requirements.

3. Compliance & Quality Assurance

All packaging processes are controlled under our ISO 9001 quality management system to ensure consistency, traceability, and product integrity throughout the supply chain.