Call Us
+86 136 6007 9809
Call Us
+86 136 6007 9809
Name: Hexagonal Spacer Female-Female Polyamide Brass Nickel Metric
Hex Spacer, Body: PA6.6, Thread: Brass Nickel Plated, M2.5 - M5, AF (SW) 6 - 10, Lengths 15.0 - 70.0mm.
Material: Nylon+Brass
These standoffs allow you to position components in assemblies and separate or connect parts. The flat sides of the hex ensure a firm grip when tightening with a wrench.
Nylon standoffs have excellent wear and abrasion resistance and also offer resistance to chemicals and solvents (except mineral acids). Exposure to moisture may cause them to expand.
Contact Resistance 1012 Ohm/cm. Dielectric Strength 50 kV/mm.
The METAL category contains various hexagonal and round spacers for different requirements. Whether hexagonal spacers in stainless steel, steel, aluminum, or nylon with a metal thread.
Nickel plated or blank. With or without undercut. As internal thread, external thread, or internal and external thread. Or round spacers in brass, steel, aluminum, and stainless steel.
Decide for yourself to determine the right product for your application.
Product Specification
Plastic (nylon hexagonal spacer post) is mainly used to fix the circuit board, making it reliable and safe and keeping it at a fixed distance.
Hexagonal plastic spacer posts are suitable for commonly used spacers in electronics, electrical systems, and other applications. It retains its dielectric properties and is used with nylon or metal screws and nuts, and is easily disassembled for replacement or repair.
Nylon (Nylon, Polyamide, PA for short) is a plastic composed of polyamide resins. Such resins can be produced by polycondensation of diamines and dicarboxylic acids or by ring-opening polymerization of lactams formed by dehydration of amino acids. Unlike PS, PE, PP, etc., PA does not soften gradually with the heat's temperature increase but softens in a narrow range of temperatures close to the melting point, which is very pronounced, with a melting point of 215-225°C. The melting point of the polyamide is the same as the melting point of the polyamide. Flow occurs once the temperature is reached.
Product Pictures
Hot Products
Contact Us
Tel.:
+86 020 8621 0320
+86 020 3121 6067
Technical Support:
Navigation
SEND INQUIREY
