Call Us

+86 136 6007 9809

Drive Rivets

Custom Stainless Steel Shoulder Rivets for Automotive Wiper Linkages

JUXIN FASTENERS supplies custom stainless steel shoulder rivets, also known as stepped rivets or pivot rivets, for automotive windshield wiper linkage assemblies.

 Designed for customer-specific OEM applications, these fasteners combine a defined shoulder bearing surface with a rivet-forming section to 

retain components while allowing controlled rotational movement where required. Original listed sizes are 10 × 31.2 mm and 12 × 35.1 mm, 

with dimensional definitions subject to engineering drawing confirmation. Explore shoulder geometry, pivot clearance, riveting processes, stainless steel selection,

 joint validation and custom drawing-based RFQs for automotive OEM and Tier-1/Tier-2 manufacturing.


Share:

Product Specification

Custom Stainless Steel Shoulder Rivets for Automotive Windshield Wiper Linkages

JUXIN FASTENERS supplies custom stainless steel shoulder rivets for automotive windshield wiper linkage mechanisms and other articulated OEM assemblies.

Also referred to as stepped rivets or pivot rivets,

 these specialized fastening components are designed to join mechanical parts while providing a defined shoulder or bearing surface for controlled movement.

Unlike conventional solid rivets intended primarily to clamp components together, 

a properly designed shoulder rivet can retain an assembly while allowing a connected linkage arm or lever to rotate around the shoulder.

This distinction is especially important in automotive windshield wiper systems, 

where linkages must repeatedly transmit motion while maintaining alignment, joint integrity and consistent mechanical operation.

The featured products are manufactured for customer-specific automotive applications.

JUXIN FASTENERS supports drawing-based technical evaluation for OEM manufacturers, 

automotive Tier-1 and Tier-2 suppliers, mechanical design engineers, production engineers and industrial sourcing teams.

Product Overview and Technical Specifications

Product Name: Automotive Windshield Wiper Shoulder Rivets

Alternative Professional Names: Stepped Rivets, Pivot Rivets, Automotive Linkage Rivets

Original Product Name: Automotive Wiper Rivets

Material: Stainless Steel

Product Type: Custom Shoulder Rivet / Stepped Rivet

Primary Application: Automotive Windshield Wiper Linkage Assemblies

Fastening Function: Mechanical Retention with Controlled Pivoting Where Required

Original Listed Sizes:

  • 10 × 31.2 mm

  • 12 × 35.1 mm

These dimensions are retained from the original product information.

The available description does not establish whether 10 mm and 12 mm refer to the shoulder diameter, shank diameter, head diameter or another feature.

 Likewise, the 31.2 mm and 35.1 mm values must be confirmed against the approved engineering drawings.

They should not be published as verified diameter-by-length specifications until their definitions are confirmed.

Additional dimensional requirements, material grades, tolerances and production quantities are subject to customer drawing review.

What Are Automotive Wiper Shoulder Rivets?

Automotive wiper shoulder rivets are fastening components used in selected windshield wiper linkage assemblies.

Their purpose is to provide mechanical retention while allowing controlled relative movement between connected parts.

A shoulder rivet generally consists of:

  • A manufactured head.

  • A larger-diameter shoulder or bearing section.

  • A smaller-diameter riveting section.

  • A defined overall length.

  • Application-specific dimensional tolerances.

The shoulder provides a bearing surface for a moving component.

The smaller riveting section can be formed during assembly to retain the connected parts.

The exact configuration depends on the OEM design.

For a rotating linkage joint, the forming operation must secure the stationary portion of the assembly without unintentionally clamping the rotating component.

Shoulder Rivets vs. Conventional Solid Rivets

A conventional solid rivet is often selected to create a permanent, tightly clamped connection.

During installation, the free end of the shank is deformed to create a second retaining head.

This can prevent relative movement between the joined components.

A shoulder rivet serves a different purpose when used in a pivot joint.

Its shoulder provides a controlled bearing region, allowing the connected component to rotate or articulate while the riveted portion secures the assembly.

Engineering Difference

Conventional Solid Rivet:

  • Primarily intended for permanent joining.

  • Often designed to restrict relative movement.

  • Retention depends on the formed rivet head and joint geometry.

Shoulder Rivet:

  • Includes a defined shoulder or stepped section.

  • Can support a rotating or sliding component.

  • Can provide controlled axial positioning.

  • Requires appropriate shoulder clearance and forming control.

A shoulder rivet is not automatically interchangeable with a standard solid rivet of similar overall dimensions.

Why Shoulder Rivets Are Used in Windshield Wiper Linkages

Automotive windshield wiper systems convert motor output into repeated movement of the wiper arms.

Depending on the vehicle design, the system may include:

  • Wiper motor and transmission components.

  • Crank arms.

  • Connecting rods.

  • Pivot levers.

  • Linkage joints.

  • Bushings.

  • Wiper shafts.

  • Supporting brackets.

Selected linkage joints require rotational movement while maintaining mechanical connection.

Shoulder rivets may be used where the joint design requires a permanent retaining feature and a defined pivoting surface.

Engineering Challenge

A conventional rivet that clamps the moving components too tightly may increase friction or restrict articulation.

A joint with excessive clearance may introduce looseness, noise, misalignment or accelerated wear.

Engineering Solution

The shoulder rivet must be designed as part of the complete linkage assembly.

Important parameters include:

  • Shoulder diameter.

  • Shoulder length.

  • Linkage hole diameter.

  • Bushing dimensions.

  • Bearing clearance.

  • Riveting section diameter.

  • Formed head geometry.

  • Axial retention.

  • Rotational resistance.

  • Material compatibility.

The goal is to achieve the specified balance between secure retention and controlled movement.

Stepped Rivet Geometry and Functional Design

The stepped geometry is the most important characteristic of this product family.

A shoulder rivet typically contains sections with different diameters or functions.

1. Manufactured Head

The manufactured head provides a retaining surface and may support the rivet during installation.

Important dimensions include:

  • Head diameter.

  • Head height.

  • Head profile.

  • Bearing surface condition.

  • Concentricity.

2. Shoulder Diameter

The shoulder acts as a bearing or locating surface for the connected component.

Its diameter influences the fit between the rivet and the rotating linkage component.

An unsuitable diameter may cause excessive play or insufficient rotational clearance.

3. Shoulder Length

The shoulder length influences the axial position and movement of the connected parts.

It must be evaluated together with the total thickness of the components surrounding the pivot.

An incorrect shoulder length may create excessive axial looseness or unwanted clamping.

4. Riveting Section

The riveting section is the portion intended to be formed during assembly, where applicable.

Its dimensions and material condition influence the forming process.

5. Transition Between Diameters

The transition between the shoulder and riveting section may influence seating, stress concentration and forming behavior.

Radius and transition geometry should follow the engineering drawing.

6. Overall Length

Overall length must be compatible with the assembly thickness and the required forming allowance.

7. Surface Finish

Surface condition can influence wear, friction and corrosion behavior at the joint.

Stainless Steel Material Selection

The original product information identifies stainless steel.

The exact stainless steel grade is not specified.

For automotive linkage applications, material selection should consider:

  • Mechanical strength.

  • Ductility.

  • Hardness.

  • Formability.

  • Corrosion resistance.

  • Fatigue behavior.

  • Wear resistance.

  • Surface condition.

  • Compatibility with bushings and mating materials.

304 Stainless Steel

304 stainless steel is widely used in industrial applications requiring suitable corrosion resistance and forming properties.

It may be considered for selected custom rivet designs.

However, this product must not be represented as confirmed 304 stainless steel without supporting material documentation.

316 Stainless Steel

316 stainless steel may be considered for applications with particular corrosion exposure requirements.

Its suitability and availability for a specific shoulder rivet design require engineering evaluation.

Material Hardness and Rivet Forming

Shoulder rivets may require a combination of bearing performance and controlled deformation during installation.

A material condition suitable for the bearing shoulder may not automatically provide the desired forming behavior at the rivet tail.

The material grade and manufacturing condition must therefore be reviewed together with the installation process.

Corrosion Resistance in Automotive Wiper Systems

Windshield wiper mechanisms may be exposed to moisture, temperature variation and environmental contaminants.

Depending on the vehicle and installation location, corrosion exposure may involve:

  • Rainwater.

  • Condensation.

  • Road contaminants.

  • Cleaning chemicals.

  • Temperature cycling.

  • Contact with dissimilar metals.

Stainless steel can provide useful corrosion resistance, but the exact performance depends on the selected grade and environment.

Where stainless steel rivets contact aluminum, coated steel or other materials, galvanic compatibility may also require evaluation.

Critical Pivot Joint Engineering Parameters

Shoulder-to-Hole Clearance

The relationship between the shoulder diameter and the mating hole influences rotational freedom and mechanical play.

The correct clearance depends on the linkage design, bushing arrangement, operating loads and required service life.

No universal clearance value should be applied without engineering validation.

Axial Clearance

Axial clearance affects whether the linkage can move freely after the rivet is formed.

Excessive clearance may allow unwanted movement.

Insufficient clearance may create binding or high friction.

Bearing Contact

The shoulder may support radial loads transmitted through the moving linkage.

Bearing performance depends on the contact geometry, mating material, surface condition and lubrication strategy.

Riveted Head Retention

The formed rivet head must retain the joint under the specified operating conditions.

The forming operation should not damage the shoulder or distort the moving component.

Rotational Resistance

The finished assembly may require a defined rotational torque or resistance range.

This is an assembly-level requirement and cannot be established from rivet dimensions alone.

Wear and Durability

Repeated movement can produce wear at the pivot interface.

Engineering validation should consider the actual load spectrum, mating materials, lubrication and environmental exposure.

Automotive Windshield Wiper Linkage Applications

1. Windshield Wiper Transmission Linkages

Windshield wiper transmission mechanisms may contain connecting rods and pivoting levers.

Engineering Challenge

The linkage must transmit repeated motion without excessive joint looseness or binding.

Engineering Solution

A custom shoulder rivet may provide a defined pivot surface and a permanent retaining feature.

Key considerations include:

  • Shoulder geometry.

  • Linkage clearance.

  • Formed head retention.

  • Wear.

  • Corrosion.

  • Repeated motion.

2. Wiper Motor Crank Linkages

Certain wiper mechanisms use crank components to convert motor rotation into reciprocating linkage movement.

Engineering Challenge

The connection may experience cyclic mechanical loading and changing force direction.

Engineering Solution

The pivot joint should be designed for the expected loading, motion range and assembly conditions.

Shoulder rivet geometry must be evaluated together with the connecting rod, bushing and crank component.

3. Wiper Linkage Pivot Arms

Pivot arms require controlled articulation while maintaining alignment.

Engineering Challenge

Excessive joint friction can interfere with movement, while excessive clearance can affect positional control.

Engineering Solution

The shoulder length and diameter should be coordinated with the mating components.

The riveting operation must provide retention without compromising the intended movement.

4. Automotive Wiper Linkage Subassemblies

Automotive Tier-1 and Tier-2 manufacturers may assemble linkage components as production subassemblies before integration into the complete wiper system.

Engineering Challenge

High-volume production requires repeatable component dimensions and predictable riveting results.

Engineering Solution

Custom shoulder rivets can be evaluated according to the approved assembly drawing and production process.

Important controls may include:

  • Dimensional inspection.

  • Component orientation.

  • Rivet feeding.

  • Fixture alignment.

  • Forming force.

  • Formed head geometry.

  • Rotational freedom.

  • Joint retention.

5. Rear Window Wiper Mechanisms

Certain rear wiper designs also incorporate articulated linkage or pivot components.

Engineering Challenge

Compact packaging can restrict available installation space.

Engineering Solution

A custom shoulder rivet may be considered where the assembly geometry and movement requirements support its use.

Actual applicability depends on the vehicle-specific mechanism.

Other Industrial Applications of Custom Shoulder Rivets

Although this product was developed for automotive windshield wiper systems, shoulder rivet technology is relevant to other articulated industrial assemblies.

Potential engineering applications include:

  • Automotive door latch linkages.

  • Selected automotive pedal mechanisms.

  • Industrial levers.

  • Mechanical hinges.

  • Equipment control linkages.

  • Appliance moving joints.

  • Mechanical actuator assemblies.

  • Selected agricultural equipment linkages.

These are related engineering application categories, not claims that the two listed wiper rivet sizes are qualified for all these uses.

Each application requires its own dimensional and mechanical validation.

Riveting Methods for Automotive Shoulder Rivets

Several riveting processes may be considered depending on the rivet design, material condition and production equipment.

1. Impact Riveting

Impact riveting uses a forming tool to deform the rivet tail and create the retaining head.

It may be suitable for production applications where the tooling, rivet geometry and assembly support are compatible.

Important considerations include:

  • Forming force.

  • Rivet alignment.

  • Workpiece support.

  • Tool geometry.

  • Final head dimensions.

  • Joint freedom of movement.

2. Compression Riveting

Compression riveting forms the rivet using controlled axial force.

The process must provide adequate retention without damaging the shoulder or over-compressing the moving components.

3. Orbital Riveting

Orbital riveting progressively forms the rivet tail using an angled forming tool.

The process can provide controlled head formation and may be suitable for certain pivoting assemblies.

Important considerations include:

  • Forming tool geometry.

  • Forming force.

  • Tool motion.

  • Rivet material condition.

  • Formed head profile.

  • Joint clearance.

4. Spin Riveting

Spin riveting uses rotating forming equipment to deform the rivet tail.

Its suitability depends on the fastener material, equipment and required joint characteristics.

5. Roll Forming or Roller Riveting

Roller forming may be used in certain specialized joint-forming applications.

The actual process must be selected according to the assembly design.

Important Production Note

Not every riveting method is suitable for every shoulder rivet.

The correct process must be validated using the actual stainless steel material, rivet geometry and automotive linkage components.

Riveting Cycle Time and Production Efficiency

The original product information refers to approximate cycle times of 0.3 seconds for high-speed riveting and 5–8 seconds for certain rotating or orbital processes.

These figures should be treated as historical process examples, not guaranteed performance for the featured rivets.

Actual cycle time depends on:

  • Rivet diameter.

  • Stainless steel grade.

  • Rivet tail geometry.

  • Forming equipment.

  • Tooling.

  • Feeding system.

  • Fixture design.

  • Forming force.

  • Inspection requirements.

  • Assembly handling.

For automotive production managers, overall assembly efficiency should be evaluated using validated equipment and production trials.

Common Riveting Problems and Engineering Solutions

Problem 1: Joint Binding After Riveting

Possible causes:

  • Excessive forming force.

  • Incorrect shoulder length.

  • Insufficient axial clearance.

  • Workpiece deformation.

Engineering response:

Review shoulder geometry, stack-up dimensions and riveting process controls.

Problem 2: Excessive Pivot Looseness

Possible causes:

  • Excessive shoulder-to-hole clearance.

  • Incorrect shoulder length.

  • Inadequate joint retention.

  • Wear at the bearing interface.

Engineering response:

Review mating dimensions, bearing surfaces and assembly acceptance criteria.

Problem 3: Cracking During Rivet Formation

Possible causes:

  • Unsuitable material condition.

  • Excessive forming deformation.

  • Incorrect tool geometry.

  • Inadequate forming allowance.

Engineering response:

Review stainless steel material properties, rivet tail geometry and forming parameters.

Problem 4: Inconsistent Rotational Resistance

Possible causes:

  • Dimensional variation.

  • Inconsistent forming.

  • Bushing variation.

  • Assembly misalignment.

  • Surface condition differences.

Engineering response:

Define appropriate dimensional controls and assembly-level rotational performance criteria.

Problem 5: Premature Pivot Wear

Possible causes:

  • Inappropriate bearing clearance.

  • Excessive loading.

  • Incompatible mating materials.

  • Surface damage.

  • Insufficient lubrication where required.

Engineering response:

Review the complete pivot joint design and durability requirements.

Problem 6: Corrosion at the Joint

Possible causes:

  • Unsuitable stainless steel grade.

  • Galvanic interaction.

  • Aggressive environmental exposure.

  • Surface contamination.

Engineering response:

Review material selection, environmental conditions and corrosion protection.

Dimensional Inspection and Quality Control

Custom automotive shoulder rivets require consistent dimensional control.

Inspection requirements should follow the approved customer engineering drawing.

Critical Dimensional Characteristics

Potential inspection characteristics include:

  • Manufactured head diameter.

  • Head height.

  • Shoulder diameter.

  • Shoulder length.

  • Riveting section diameter.

  • Riveting section length.

  • Overall length.

  • Transition radius.

  • Concentricity.

  • Surface finish.

  • Burr condition.

Material Verification

Confirm the specified stainless steel grade and material condition.

Visual Inspection

Check for:

  • Cracks.

  • Burrs.

  • Head deformation.

  • Surface damage.

  • Incorrect stepped geometry.

  • Other defects affecting assembly.

Assembly Validation

Depending on customer requirements, validation may include:

  • Rivet installation force.

  • Formed head dimensions.

  • Axial retention.

  • Rotational resistance.

  • Pivot clearance.

  • Linkage articulation.

  • Joint wear.

  • Corrosion exposure.

  • Durability under cyclic loading.

These are possible customer-defined quality requirements, not claims that every test is routinely performed for each product.

Automotive OEM and Tier-1/Tier-2 Quality Requirements

Automotive manufacturers may specify additional requirements for production approval and ongoing quality control.

Depending on the customer program, these may include:

  • Approved engineering drawings.

  • Material specifications.

  • Dimensional inspection reports.

  • Process control plans.

  • Product traceability.

  • Engineering change control.

  • First article inspection.

  • PPAP documentation.

  • Customer-specific testing.

  • Production part approval requirements.

Such requirements must be confirmed for the specific customer and production program.

No particular automotive certification or approval is implied solely by supplying custom automotive rivets.

Production Engineering for High-Volume Wiper Linkage Assembly

For production managers and manufacturing engineers, shoulder rivet selection affects assembly consistency and manufacturing efficiency.

Important production factors include:

  • Rivet feeding and orientation.

  • Dimensional repeatability.

  • Material condition.

  • Installation equipment.

  • Fixture accuracy.

  • Riveting force.

  • Formed head consistency.

  • Pivot freedom.

  • Inspection time.

  • Scrap and rework.

  • Production scheduling.

  • Repeat-order consistency.

A correctly designed shoulder rivet should be evaluated as part of the complete wiper linkage assembly rather than as an isolated component.

Custom Stainless Steel Shoulder Rivets to Engineering Drawings

Standard shoulder rivets may not meet the dimensional and functional requirements of every automotive linkage.

JUXIN FASTENERS supports drawing-based inquiries for custom stepped rivets and automotive pivot fastening components.

Custom engineering requirements may include:

  • Shoulder diameter.

  • Shoulder length.

  • Riveting section diameter.

  • Riveting section length.

  • Head geometry.

  • Transition radii.

  • Stainless steel grade.

  • Material condition.

  • Surface finish.

  • Dimensional tolerances.

  • Installation method.

  • Formed head requirements.

  • Joint clearance.

  • Retention performance.

  • Expected production quantity.

Manufacturing feasibility and quotation depend on the supplied technical requirements.

Metric Dimensions and Inch References

The existing product information lists:

  • 10 × 31.2 mm

  • 12 × 35.1 mm

For dimensional reference only:

  • 10 mm ≈ 0.394 in

  • 31.2 mm ≈ 1.228 in

  • 12 mm ≈ 0.472 in

  • 35.1 mm ≈ 1.382 in

These conversions do not establish the meaning of each original dimension or confirm the availability of equivalent inch-series products.

Metric and inch fasteners should not be treated as directly interchangeable without dimensional and application verification.

Frequently Asked Engineering Questions

What are automotive wiper shoulder rivets?

They are stepped fastening components used in selected windshield wiper linkage assemblies to provide mechanical retention and a defined bearing surface for pivoting movement.

What is the difference between a shoulder rivet and a solid rivet?

A shoulder rivet includes a defined shoulder that can support a rotating or sliding component. A conventional solid rivet is often used to create a tightly clamped permanent joint.

Are stepped rivets and shoulder rivets the same?

The terms are closely related. Shoulder rivet emphasizes the functional bearing shoulder, while stepped rivet emphasizes the change in shank diameter.

Can a shoulder rivet allow rotation after installation?

Yes, when the joint is designed with suitable shoulder geometry, clearance and riveting controls.

What stainless steel grade is used?

The existing product information specifies stainless steel but does not identify the exact grade. Material requirements should be confirmed from the customer drawing.

What sizes are available?

The original product information lists 10 × 31.2 mm and 12 × 35.1 mm. Their dimensional definitions must be confirmed from the engineering drawing.

Can shoulder rivets be installed using orbital riveting?

Certain shoulder rivets can be installed using orbital riveting equipment. Suitability depends on the rivet material, geometry and assembly requirements.

Can these rivets be used in other automotive linkages?

Custom shoulder rivets may be considered for other pivoting mechanisms, but each application requires separate engineering validation.

How is rotational freedom controlled?

Rotational freedom depends on shoulder diameter, shoulder length, mating-hole dimensions, bushings, axial clearance and the final riveting process.

Can JUXIN FASTENERS supply custom automotive shoulder rivets?

JUXIN FASTENERS supports customer-specific shoulder rivet inquiries based on engineering drawings, material specifications and production requirements.

What information is required for an OEM quotation?

A dimensioned drawing, stainless steel grade, shoulder geometry, joint requirements, installation method, tolerances and estimated annual production volume provide a useful basis for technical review.

Request a Custom Automotive Shoulder Rivet RFQ

JUXIN FASTENERS supports engineering inquiries for stainless steel shoulder rivets, stepped rivets and custom automotive linkage fastening components.

For a new automotive OEM program or an existing production component, please provide:

  • 2D engineering drawing or 3D CAD file.

  • Required stainless steel grade.

  • Shoulder diameter and length.

  • Riveting section diameter and length.

  • Manufactured head dimensions.

  • Transition radii.

  • Critical dimensional tolerances.

  • Mating linkage and bushing dimensions.

  • Required axial clearance.

  • Required rotational resistance.

  • Riveting process and tooling requirements.

  • Required retention and durability performance.

  • Environmental and corrosion requirements.

  • Automotive quality documentation requirements.

  • Prototype or initial production quantity.

  • Estimated annual production demand.

  • Target project schedule.

Our team can review the supplied engineering requirements and discuss the next steps for technical clarification and quotation.

JUXIN FASTENERS

Website: https://www.juxinfasteners.com/

Email: info@juxinfasteners.com

Submit Your Engineering Drawings for a Custom Automotive Shoulder Rivet RFQ.


Product Packaging

Packaging Standard

At Juxin Fasteners, we apply standardized export packaging to ensure product protection, traceability, and compliance with international logistics requirements.

1. Standard Export Packaging

Unless otherwise specified, all products will be packed according to our factory standard export packaging, which includes:

Moisture-resistant inner protection

Poly bag or small box packing as required

Reinforced export cartons

Clear labeling with part number, specification, batch number, and quantity

Palletizing for sea or air shipment when necessary

Our standard packaging is designed to ensure safe transportation, efficient warehousing, and long-distance international shipping.

2. Customized Packaging Options

We also provide customized packaging solutions according to customer requirements, including but not limited to:

Private labeling

Customized barcodes

Specific carton dimensions

Retail packaging

Special pallet configuration

Customer-specific marking and identification

So that you know, customized packaging may involve additional costs and extended lead time depending on the complexity of the requirements.

3. Compliance & Quality Assurance

All packaging processes are controlled under our ISO 9001 quality management system to ensure consistency, traceability, and product integrity throughout the supply chain.


Product Pictures

Automotive Wiper Rivets

Contact Us

Tel.:

+86 020 8621 0320

+86 020 3121 6067

Mobile: +86 136 6007 9809

Technical Support:

SEND INQUIREY

Copyright © Guangzhou Juxin Development Co., Ltd. All Rights Reserved | Sitemap