Call Us
+86 136 6007 9809
Call Us
+86 136 6007 9809
JUXIN FASTENERS supplies steel flat head partial hexagonal body blind rivet studs for OEM sheet-metal assemblies requiring external threaded mounting points and one-sided installation. The partial hexagonal section can engage a compatible mounting hole to resist stud rotation during mating-nut assembly. Offered in M5, M6 and M8 with a blue-white zinc finish, these studs are suitable for engineering evaluation in equipment housings, fabricated brackets and industrial enclosures. Drawing-based inquiries can address mounting-hole fit, installation requirements and purchasing specifications.
Thread Sizes: M5, M6, M8
Material: Steel (grade to be confirmed)
Surface Finish: Blue-White Zinc (RoHS compliance subject to verification)
Grip Range: 0.5–5.5 mm (product family; verify by part number)
Head Type: Flat Head
Body Type: Partial Hexagonal / Part-Hex
Thread Type: External Male Metric Thread
Installation: One-Sided Mechanical Blind Riveting
Product Specification
Product Specifications — Steel Flat Head Partial Hexagonal Blind Rivet Studs for OEM Supply
JUXIN FASTENERS supplies steel flat head partial hexagonal body blind rivet studs with a blue-white zinc finish for industrial OEM assemblies, sheet-metal fabrication and drawing-based procurement.
These fasteners provide external male-threaded mounting points where installation must be performed from one accessible side of a panel or hollow section. The partial hexagonal body is designed to engage a compatible polygonal mounting hole, helping resist rotation during installation and subsequent mating-nut assembly.
For engineers, the principal selection requirements are mounting-hole compatibility, installed retention, rotational resistance, grip thickness and thread engagement.
For purchasing managers and supplier development teams, the principal sourcing requirements include drawing equivalence, coating specification, dimensional inspection, production consistency and commercial supply conditions.
Technical Product Data
Product Type: Flat Head Partial Hexagonal Body Blind Rivet Stud
Material: Steel
Steel Grade: To be confirmed from approved specifications
Thread Sizes: M5, M6, M8
Thread Type: External Male Metric Thread
Head Configuration: Flat Head
Body Configuration: Partial Hexagonal / Part-Hex Body
Surface Treatment: Blue-White Zinc
RoHS Compliance: Subject to verification
Grip Range: 0.5–5.5 mm across the product family
Installation: One-Sided Mechanical Blind Riveting
Head Dimensions: According to approved drawing
Hexagonal Body Dimensions: According to approved drawing
Mounting-Hole Dimensions: According to approved drawing
External Thread Projection: According to approved drawing
Mechanical Performance: Subject to product-specific verification
Individual part numbers must be checked for their applicable grip ranges and dimensional specifications.
How Partial Hexagonal Blind Rivet Studs Work
A partial hexagonal blind rivet stud provides an external threaded attachment point without requiring direct access to the rear surface of the parent material.
The rivet body is inserted into a prepared mounting hole from the accessible side.
A compatible setting tool then deforms the designated rivet-body section behind the panel, creating mechanical retention.
The exposed male thread allows a mating bracket, support or other component to be secured using a suitable nut.
The partially hexagonal body introduces a geometric interface between the fastener and mounting hole.
When correctly matched, this interface can help resist stud rotation as the mating nut is tightened or removed.
The actual installation process must follow the selected product drawing and compatible tooling requirements.
Why OEM Engineers Specify a Partial Hex Body
A partial hexagonal body may be selected when the application requires resistance to rotation of the installed stud.
This is particularly relevant where a mating nut will be installed after the stud has been set.
A smooth round body does not provide the same polygonal engagement geometry.
A knurled body uses raised exterior features that may engage the parent material.
A partial hexagonal body uses a polygonal section that can interface with a corresponding mounting hole.
Its performance depends on:
Hexagonal section geometry
Mounting-hole dimensions
Parent-material strength
Panel thickness
Rivet-body deformation
Installation-tool settings
Applied mating-nut torque
No universal spin-out torque is claimed.
The required rotational resistance should be defined and validated for the actual assembly.
Partial Hexagonal vs. Full Hexagonal Body
Partial hexagonal and full hexagonal body configurations are not automatically interchangeable.
A partial hexagonal body contains a polygonal section over part of the relevant body length.
A full hexagonal body incorporates a more extensive polygonal exterior according to its design.
The differences may affect:
Mounting-hole engagement
Installation deformation
Grip compatibility
Insertion clearance
Setting-tool requirements
Installed rotational resistance
OEM drawings should define the relevant body geometry rather than relying on the terms partial hex or full hex alone.
Mounting-Hole Geometry and Tolerance
The mounting hole is a functional part of the fastening system.
Where rotational resistance depends on polygonal engagement, the hole must provide the required matching geometry.
Relevant dimensions include:
Hole across-flats dimension
Across-corners clearance
Corner geometry
Hole tolerance
Hole position
Parent-material thickness
Edge distance
Burr condition
Local panel deformation
A hole that is too large may reduce the intended geometric engagement.
A hole that is too small may prevent proper insertion or damage the fastener or parent material.
The correct dimensions must be taken from the approved part drawing.
Engineering Information Gain — Hole Quality Can Affect Installed Spin-Out Resistance
Two production panels may have the same nominal hexagonal hole size but behave differently during stud installation.
This can occur when the hole-manufacturing processes produce different edge conditions.
For example, punched holes may contain burrs or local material deformation.
Laser-cut holes may have different corner geometry or edge characteristics.
Machined holes may have different surface and dimensional conditions.
These variations can affect insertion, seating and geometric engagement.
For repeat OEM production, the hole manufacturing process should therefore be considered during qualification.
An installation trial using accurately prepared prototype holes may not fully represent production performance if the actual production holes have different tolerances or edge conditions.
A practical qualification plan should include representative production panels rather than relying only on loose-fastener dimensional inspection.
Blue-White Zinc Finish and OEM Surface Requirements
The specified surface treatment is blue-white zinc.
This is a commercial appearance designation, not a complete coating specification.
The actual coating system should be defined through the approved purchasing or engineering requirements.
Important characteristics may include:
Zinc coating type
Coating thickness
Conversion coating
Supplemental treatment
Surface appearance
Corrosion requirements
Thread compatibility
Restricted-substance requirements
Inspection documentation
A blue-white appearance does not independently establish coating thickness, corrosion resistance or RoHS compliance.
Where required, appropriate supporting documentation should be obtained for the supplied coating system.
ISO 4042 and Electroplated Fastener Requirements
ISO 4042 provides a relevant international framework for electroplated coating systems on steel fasteners.
It addresses coating-system requirements and related dimensional considerations.
It also includes requirements and recommendations concerning hydrogen embrittlement risk.
For an OEM purchase specification, ISO 4042 may be considered when the actual coating process falls within its scope.
However, the product information supplied here does not establish a specific coating designation or certification.
The approved drawing and coating specification should determine which requirements apply.
Coating Thickness and Finished Dimensions
For partial hexagonal blind rivet studs, the finished body dimensions matter because the polygonal section must engage the prepared mounting hole.
A coating system may affect:
Finished across-flats dimensions
Across-corners clearance
Insertion fit
External thread dimensions
Surface condition
Installation consistency
The engineering team should determine whether critical dimensions are specified before or after coating.
When qualifying a replacement supplier, finished dimensions should be compared with the approved drawing.
A fastener that meets nominal uncoated dimensions may still require verification after surface treatment.
Corrosion Performance and Test Requirements
The corrosion performance of a zinc-coated steel fastener depends on the complete coating system and service environment.
Relevant factors include:
Coating thickness
Conversion coating
Supplemental treatment
Exposure to moisture
Salt contamination
Mechanical damage
Dissimilar-metal contact
Storage conditions
Where testing is required, ISO 9227 or ASTM B117 may provide relevant salt-spray test methods.
The required exposure duration and acceptance criteria must be defined separately.
No specific salt-spray rating or outdoor service life is claimed for this product.
Hydrogen Embrittlement Considerations
Certain electroplating processes can introduce hydrogen into steel components.
For susceptible materials, hydrogen may contribute to delayed cracking under specific conditions.
The risk depends on steel strength, hardness, manufacturing history, coating process and applied stress.
The exact steel grade and hardness have not been confirmed.
Therefore, no product-specific hydrogen embrittlement classification or treatment requirement is claimed.
Where applicable, the approved material and coating specifications should address relevant controls.
Metric Thread Sizes and Inch References
The confirmed thread sizes are M5, M6 and M8.
M5: Approximately 0.197 in nominal diameter
M6: Approximately 0.236 in nominal diameter
M8: Approximately 0.315 in nominal diameter
These are approximate dimensional conversions only.
They are not equivalent UNC, UNF or BSW thread sizes.
Metric and Unified inch threads are not directly interchangeable.
ISO 261 and ISO 965 provide relevant references for ISO metric thread combinations and tolerances where specified.
Actual pitch and tolerance must be confirmed from the approved drawing.
Grip Range and Panel Thickness
The stated product-family grip range is 0.5–5.5 mm.
Approximate inch equivalents:
0.5 mm = 0.020 in
5.5 mm = 0.217 in
Grip range describes the material thickness that the selected rivet body is designed to accommodate during installation.
It does not describe external stud length.
Individual M5, M6 and M8 variants may have different permitted grip ranges.
The actual part number should be selected according to the parent-panel thickness and approved drawing.
Incorrect grip selection may cause incomplete deformation, poor head seating or insufficient installed retention.
Flat Head and External Thread Projection
The flat head provides the accessible-side seating interface.
The head diameter and thickness affect panel contact and clearance for mating components.
A flat head should not automatically be described as flush-mounted.
The external threaded projection must also be evaluated after installation.
Important dimensions include:
Head diameter
Head thickness
Body dimensions
External threaded length
Installed stud projection
Mating bracket thickness
Required nut engagement
Blind-side clearance
The loose-fastener overall length should not automatically be treated as the usable installed stud projection.
One-Sided Installation Procedure
A typical installation sequence includes:
Prepare the mounting hole according to the approved drawing.
Inspect the hole geometry and edge condition.
Confirm the parent-material thickness.
Verify the selected stud's grip range.
Engage the external thread with compatible setting equipment.
Align the partial hexagonal body with the prepared mounting hole.
Insert the fastener from the accessible side.
Seat the flat head against the panel.
Apply the approved setting action.
Form the retaining feature behind the parent material.
Release the setting tool.
Inspect the installed fastener before assembling the mating component.
Tool configuration, setting stroke and acceptance criteria must be verified for the selected part.
Axial Retention and Rotational Resistance
The installed stud must provide the mechanical performance required by the assembly.
Axial Retention
The deformed rivet body must resist the specified extraction loads.
Rotational Resistance
The installed fastener must resist unwanted rotation during mating-nut assembly.
Thread Integrity
The external male thread must remain suitable for the intended mating hardware.
Head Seating
The flat head should seat correctly against the parent material.
Panel Integrity
The surrounding material must remain suitable for the intended loads.
No universal pull-out force, spin-out torque, tightening torque or fatigue rating is claimed.
These characteristics require product-specific testing or approved engineering documentation.
Anti-Rotation Does Not Prevent Nut Loosening
The partial hexagonal body can contribute to resistance against rotation of the stud within the parent panel.
This is different from preventing the mating nut from loosening.
Stud Anti-Rotation
Concerns rotation of the installed rivet stud within the mounting hole.
Nut Loosening Resistance
Concerns maintaining the required threaded-joint condition during service.
Where vibration resistance is required, the complete threaded connection should be evaluated using an appropriate locking strategy.
OEM Application Example — Equipment Enclosure Mounting
Consider an OEM equipment enclosure requiring an M6 external threaded mounting point.
The rear side of the panel is inaccessible after fabrication.
The customer requires a blue-white zinc finish and a removable mounting bracket.
A partial hexagonal blind rivet stud may be evaluated for this application.
The engineering team should confirm:
M6 thread pitch and tolerance
Steel grade
Parent-panel material
Panel thickness
Approved grip range
Hexagonal body dimensions
Mounting-hole geometry
Head dimensions
Installed stud projection
Nut engagement
Assembly torque
Installation-tool compatibility
Axial retention
Rotational resistance
Coating specification
Corrosion requirements
The nominal M6 thread and product appearance alone do not establish compatibility.
Industrial Applications
Industrial Machinery
Potential uses include equipment covers, mounting brackets, guards and serviceable components.
Electrical Cabinets and Control Enclosures
Possible applications include internal mounting supports, accessory brackets and fabricated housings.
HVAC Equipment
Potential applications include sheet-metal housings, equipment brackets and mounting supports.
Automotive Equipment and Tier 1 Assemblies
The studs may be evaluated for selected non-safety-critical brackets, fabricated panels and equipment housings.
Automotive use requires project-specific engineering and customer approval.
Commercial Vehicle Equipment
Potential applications include selected non-critical equipment mounting points and fabricated metal components.
Fabricated Metal Products
Other possible applications include industrial cabinets, hollow metal profiles, modular sheet-metal assemblies and equipment frames.
Final selection must reflect the actual service environment and mechanical requirements.
OEM Supplier Qualification — What Purchasing Teams Should Verify
A supplier quotation should identify more than nominal thread size and unit price.
Purchasing and supplier development teams should review:
Product Identity
Confirm flat head, partial hexagonal body and external male thread.
Material
Verify the required steel grade and material condition.
Dimensional Equivalence
Compare head dimensions, body geometry, grip range and stud projection.
Mounting-Hole Compatibility
Confirm the required polygonal hole dimensions.
Coating
Define the actual blue-white zinc coating system.
Installation
Review compatible tooling and setting parameters.
Mechanical Performance
Determine whether axial retention and rotational resistance testing is required.
Documentation
Define inspection records, traceability and drawing revision requirements.
Commercial Terms
Confirm order quantity, annual demand, delivery expectations and packaging instructions.
Change Control
Establish approval requirements for changes in material, geometry, coating or manufacturing specification.
Information Gain — The Hidden Cost of a Nominally Equivalent Supplier
Two suppliers may quote an M6 partial hexagonal blind rivet stud with the same material description and surface appearance.
However, differences in body geometry or coating may affect the assembly.
For example:
A different across-flats dimension may require a mounting-hole change.
A different hexagonal section length may alter the engagement geometry.
A different grip range may make the fastener unsuitable for the existing panel.
A different stud projection may reduce usable nut engagement.
A different coating specification may require corrosion or compliance requalification.
A different installation geometry may require changes to setting equipment.
For supplier development, these issues should be assessed before comparing unit prices.
The total sourcing decision should consider tooling, inspection, qualification, production consistency and long-term supply requirements.
Engineering Change Control for Production Programs
For established OEM assemblies, changes to the fastener should be reviewed according to customer requirements.
Potential controlled characteristics include:
Steel grade
Material condition
Head geometry
Partial hexagonal dimensions
Body length
Grip range
Thread dimensions
Surface coating system
Installation process
Inspection requirements
Where a proposed change affects fit, function or approved specifications, additional review or validation may be required.
The approved engineering drawing should remain the primary reference.
Drawing-Based OEM and Custom Requirements
Some applications require special dimensions or performance characteristics.
Potential drawing-based requirements include:
Customer-defined partial hexagonal dimensions
Specific across-flats tolerances
Modified hexagonal section length
Special head dimensions
Application-specific grip range
Defined steel grade
External stud projection
Controlled thread tolerances
Customer-specified zinc coating
Inspection documentation
Packaging and traceability requirements
Nonstandard requirements are subject to technical review and manufacturing feasibility confirmation.
Frequently Asked Questions
What is a partial hexagonal blind rivet stud?
It is a mechanically installed fastener with an external male thread and a partially hexagonal body, intended for one-sided installation in a compatible panel.
What thread sizes are available?
The confirmed sizes are M5, M6 and M8.
What is the grip range?
The supplied product-family range is 0.5–5.5 mm. Individual part-number ranges must be confirmed.
Why use a partial hexagonal body?
The polygonal section can engage a compatible mounting hole and contribute to resistance against stud rotation.
Does the fastener require a hexagonal mounting hole?
Where anti-rotation depends on polygonal engagement, the mounting hole must provide compatible geometry. Exact dimensions must be confirmed from the approved drawing.
Is blue-white zinc automatically RoHS compliant?
No. Compliance requires appropriate documentation for the actual coating system.
Can these studs replace smooth round body studs?
Not automatically. Mounting-hole geometry, body dimensions, installation equipment and installed performance must be reviewed.
Can they replace stainless steel rivet studs?
Not automatically. Material properties, corrosion requirements, installation behavior and mechanical performance must be evaluated.
Does the partial hexagonal body prevent the mating nut from loosening?
No. Stud anti-rotation and nut loosening resistance are separate engineering functions.
Related Industrial Fastening Solutions
Engineers and procurement teams evaluating steel partial hexagonal blind rivet studs may also consider these related product categories.
Stainless Steel Partial Hexagonal Blind Rivet Studs — for comparison with a natural-finish stainless steel material system.
Color Zinc Partial Hexagonal Blind Rivet Studs — for applications requiring a different specified zinc coating appearance.
Smooth Round Body Blind Rivet Studs — for cylindrical body configurations.
Knurled Body Blind Rivet Studs — for alternative body engagement characteristics.
Thin Head Blind Rivet Studs — for reduced head projection requirements.
Countersunk Blind Rivet Studs — for recessed head installation requirements.
Blind Rivet Nuts — for one-sided assemblies requiring internal female threads.
Self-Clinching Studs — for suitable press-installed sheet-metal applications.
Weld Studs — for applications designed around an approved welding process.
These are contextual internal-link anchor texts. Each should be linked only to a verified relevant product page.
OEM RFQ Checklist
For accurate quotation and technical review, please provide the following information where available:
Required thread size: M5, M6 or M8
Engineering drawing or CAD file
Thread pitch and tolerance
Required steel grade
Flat-head dimensions
Partial hexagonal across-flats dimension
Hexagonal section length
Body transition geometry
External stud projection
Parent-panel material
Panel thickness
Required grip range
Mounting-hole dimensions and tolerance
Installation equipment and setting requirements
Blue-white zinc coating specification
RoHS or corrosion documentation requirements
Required axial retention
Required rotational resistance
Inspection and traceability requirements
Initial order quantity
Estimated annual demand
Packaging and delivery requirements
Providing the approved drawing and installation conditions helps establish compatibility and accurate quotation requirements.
JUXIN FASTENERS — OEM Blind Rivet Stud Supply
JUXIN FASTENERS supplies industrial fastening products for international OEM engineering, procurement and supplier development requirements.
Our steel flat head partial hexagonal body blind rivet studs with blue-white zinc finish are intended for applications requiring external threaded mounting points, one-sided installation and geometric resistance to rotation.
For M5, M6 and M8 requirements, customers may submit engineering drawings, coating specifications, installation details and purchasing quantities for technical review.
Request an OEM Technical Quotation
Email: info@juxinfasteners.com
Website: www.juxinfasteners.com
Please include your product drawing, required quantity, steel specification, panel thickness, mounting-hole dimensions and coating requirements.
JUXIN FASTENERS — Industrial Fastening Solutions for OEM Engineering and Global Procurement.
Product Packaging
Product Packaging — Steel Partial Hexagonal Blind Rivet Studs
Packaging for M5, M6 and M8 steel flat head partial hexagonal blind rivet studs with blue-white zinc finish is subject to confirmed order and customer requirements.
Protective Packaging: Suitable protective arrangements may be specified to help reduce damage to external male threads, flat-head seating surfaces, partial hexagonal body geometry and zinc-coated surfaces.
Outer Packaging: Carton arrangements may be reviewed according to shipment quantity, weight and handling requirements.
Pallet Packaging: Palletized shipments may be considered for bulk OEM orders, subject to confirmation.
Product Identification: Customer-specified labels may identify the part number, thread size, material, surface finish, quantity, lot number and drawing revision.
Lot Traceability: Identification and traceability requirements should be defined in the approved purchasing and quality documentation.
OEM Packaging: Customer-specific packing quantities, component segregation, labeling and logistics instructions are subject to review.
Final packaging details will be confirmed against the approved order.
For OEM quotations and packaging requirements:
Email: info@juxinfasteners.com
Website: www.juxinfasteners.com
Product Pictures
Tags
Contact Us
Tel.:
+86 020 8621 0320
+86 020 3121 6067
E-mail:
Technical Support:
Navigation
SEND INQUIREY
